Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2241)

Brocade Network Advisor SAN + IP User Manual 2169
53-1003155-01
About user privileges
D
SAN - Port Mapping - Host Allows you to identify all
the HBAs that are in the
same server.
Disables the Host Port
Mapping command from
the Discover menu.
Disables the Server
right-click command on
HBAs. Enables Host Port
Mapping command from
the Discover menu and
right-click menu; however,
disables the Create,
Delete, and OK buttons. Enables Host Port
Mapping command from
the Discover menu and
right-click menu.
Enables all functions in
the Servers dialog box.
SAN - Port Mapping -
Storage Allows you to construct
multi-port storage
systems out of individual
storage ports. Disables the Storage Port
Mapping command from
Discover menu and
right-click menus for
Storage products and
ports in the tree and map. Enables the Storage Port
Mapping command from
Discover menu right-click
menus for Storage
products and ports in the
tree and map.
Allows you to open the
Storage Port Mapping
dialog box; however,
disables the Create,
Delete, right and left
arrow, and OK buttons. Enables the Storage Port
Mapping command from
Discover menu and
right-click menus for
Storage products and
ports in the tree and map.
Enables all functions on
the Storage Port Mapping
dialog box.
SAN - Properties -
Add/Delete Columns Allows you to define new
properties as well as
remove them. Disables the Add, Edit
and Delete buttons on the
Create View dialog box
Columns tab. Disables
the Add Column, Edit
Column, and Delete
Column commands on
the right-click menu of the
Product List column
headers.
Disables the Add, Edit,
and Delete commands on
the property headers in
property sheets. Same as No Privilege. Enables the Add, Edit,
and Delete properties
commands and buttons
in the Create View and
Edit View dialog box
boxes, the Product List
column header right-click
menu, and the Property
Sheet property header
right-click menu.
SAN - Routing
Configuration Allows you to configure
Routing and domain IDs
of phantom switches. Disables the Routing
Configuration and
Routing Domain IDs
commands from the
Configure menu and
right-click menu. Disables the Routing
Configuration and
Routing Domain IDs
commands from the
Configure menu and
right-click menu. Enables the Routing
Configuration and
Routing Domain IDs
commands from the
Configure menu and
right-click menu.
Enables all functions in
the dialog box boxes.
SAN - SCOM Management Allows you to manage the
SCOM plug-in.
Disables the Plug-in for
SCOM command from the
Tools menu. Disables the Plug-in for
SCOM command from the
Tools menu. Enables the Plug-in for
SCOM command from the
Tools menu.
Enables all functions in
the dialog box boxes.
TABLE 220 SAN privileges and application behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write