Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2143)

Brocade Network Advisor SAN + IP User Manual 2071
53-1003155-01
Exporting IP reports to e-mail recipients
52
Modules Module information shows what modules are installed on the product.
•
Unit/Slot Number — For products that support stacking, you can view the unit
number and slot number.
Slot Number — For products that do not support stacking, you can view the slot
number.
•
Type — For wireless products, the type shows the model name of the product. For
wired products, the type of module installed in the slot.
•
Serial Number — The serial number of the module.
For wired products, the serial number cell may be blank.
•
Ports — The number of ports on the product.
The number of ports for ATM modules displays as zero.
•
Present — Whether the module is still installed on the product.
IP Addresses The IP addresses of each interface, including the virtual routing interface on wired
products. For Layer 2 switches, the management IP address displays in the IP Addresses
table with "management" in the Interface column.
•
Port — The port number.
•
IP Address — The IP address.
•
Subnet Mask — The subnet mask number.
•
VRF — The virtual routing interface.
Ethernet Ports Physical port information for each port on the product. The identifier, interface name,
type, speed, physical address (displays as 0000.0000.0000 for module interfaces),
name, VLAN tag mode (tagged, untagged, dual, or blank), and duplex mode of the
physical interfaces on the product.
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Type — The type of port.
•
Speed (Mbps) — The speed of the port.
•
MAC Address — The MAC address of the port.
•
Name — The name of the port.
•
Tag Mode — The tag mode of the port.
•
Duplex Mode — The duplex mode of the port.
•
MCT Client Name — The client name of the MCT switch.
•
Role — The role of the port, such as ICL or MCT.
Cluster (MCT switches
only) Cluster information for a Multi-Chassis Trunk (MCT) switch. Information includes:
•
Cluster ID — The MCT cluster ID.
•
Cluster Name — The MCT cluster name.
•
Cluster State — Whether the MCT cluster is deployed or undeployed.
•
Client Isolation Mode — Whether isolation mode is loose or strict.
•
Active Member VLAN Range — The active member VLAN for data.
•
Configured Member VLAN Range — The configured member VLAN for data.
•
Keep Alive VLAN — An alternate VLAN for Cluster Communication Protocol (CCP)
when the Inter-Chassis Link (ICL) is down.
•
Session VLAN — The VLAN used by the cluster for control operations.
•
ICL Name — The ICL name.
TABLE 191 Detailed Product Report fields and components (Continued)