Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1635)

Brocade Network Advisor SAN + IP User Manual 1563
53-1003155-01
SSL certificate configuration
40
The SSL certificates and keys can only be deployed from SSL Certificate Manager to the following
SSL-capable IronWare OS devices:
• ServerIron with WSM6-SSL module, running software release 10.2.01c or later
• ServerIron with WSM6-SSL-Slave module, running software release 10.2.01c or later
• ServerIron 4G-SSL (Stackable), running software release 10.2.01c or later
• ADX running software release 12.1.00 or later
NOTE
If the ADX is running software release 12.3.00 or later, you can only view and manage SSL
certificates to Virtual IP servers that are in your Area of Responsibility (AOR). To add a Virtual IP
server to your AOR, refer to
“Assigning products to an AOR” on page 245
The Certificate View tab contains the following fields and components.
- Certificates/Keys — A table displaying certificates and certificate information.
- Products — A tree structure showing products that have certificates/keys. When you select
a certificate/key, the product associated with that certificate/key is highlighted.
- Valid Certificates — The number of valid certificates.
- Certificates About to Expire — The number of certificates that are about to expire.
- Expired Certificates — The number of certificates that have expired.
- ID — A unique system-assigned ID for each certificate entry.
- Status — Possible values are Valid, About to Expire, or Expired.
- Certificate — The user-assigned certificate name. The same name may be used on
different products.
- Key — The user-assigned key name. The same name may be used on different products.
- Start Date — The start date for the certificate. If only a key is present, this field is blank. For
chained certificates, the date for the last certificate in the chain is displayed.
- Expiration — The expiration date for the certificate. If only a key is present, this field is
blank. For chained certificates, the date for the last certificate in the chain is displayed.
- Certificate Size — The certificate size in bytes. If only a key is present, this field is blank.
- Key Strength — The key strength (size in bits). If only a certificate is present, this field is
blank.
- Common Name — The common name for the certificate. For chained certificates, the
name for the last certificate in the chain is displayed.
- Chain — Yes if certificates are chained, No if certificates are not chained. If only a key is
present, this field is blank.