Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 344)

272 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Dashboard customization
7
IP Status widget
The IP Status widget ( Figure 102 ) displays the device status as a pie chart. If you discover a DCB
switch from the IP tab, the switch status only displays in the IP Status widget. However, if you
discover a DCB switch from the SAN tab, the switch status displays in both the SAN Status and IP
Status widgets.
FIGURE 102 IP Status widget
The IP Status widget includes the following data:
• Widget title — The name of the widget.
• Show Legend icon — Click to display the color legend for the widget below the pie chart.
• Widget summary — The product count for each status (worst to best order) with the associated
icon displays underneath the widget title.
• Pie chart — The device status as a percentage of the total number of devices.
The pie chart displays the percentage in various colors on each slice. Tooltips showing the
number of devices in that state are shown when you pause on the bar. When there is one
status category with less than one percent of the total number of devices, the status widget
displays the number of devices in each category on each slice. Double-click a section in the
graph to navigate to the IP Inventory Detailed View page. For more information, refer to
“Viewing additional IP product data” on page 273.
For a VCS fabric, status is determined by the reachability of the individual members of the VCS
fabric. The IP Status widget displays the most severe reachability of a member of the VCS
fabric. For example, if one member of the VCS fabric has a reachability status of “degraded”
and all other members are ‘reachable’, then the VCS fabric status displays as “degraded”.
Color legend — Displays the color legend below the pie chart. Click the Show Legend icon to
display.
- Green — Reachable: IP product is online and accessible by IP (ICMP/TCP) and SNMP.
- Yellow — Degraded Link: IP product is accessible by IP (ICMP/TCP); however, it is not
accessible by SNMP.
- Violet — Unhealthy: One or more units are not present, unit power is off, or the stacking
connection is down.
- Blue — Not Reachable: IP product is not online and not accessible by IP (ICMP/TCP).