Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 681)

Brocade Network Advisor SAN + IP User Manual 609
53-1003155-01
LDAP server configuration
13
The String Attribute Editor dialog box displays.
5. Enter the areas of responsibility (such as, All Fabrics, All IP Products, and All Hosts) in the Value
field and click OK..
6. Select NmRoles in the Attributes list and click Edit.
7. Enter the Management application user roles (such as Host Administrator, IP System
Administrator, Network Administrator, Operator, Report User Group, SAN System Administrator,
Security Administrator, Security Officer, and Zone Administrator) in the Value field and click OK.
8. Close the ADSI Edit dialog box.
Assigning roles and AORs to an AD group
Using Authentication Server Groups, you assign users to groups within the Authentication Server
Groups server, and assign roles and AORs to the groups within the Management application.
To assign roles and AORs to an AD group, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click the Authentication Server Groups tab.
FIGURE 249 Users dialog box - Authentication Server Groups tab
3. Select the roles and AORs you want to assign to the AD group in the Available Roles / AORs
table.