Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1418)

1346 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
VRRP-E: VRRP/ VRRP-E management
31
Select Add > IPV4 > Basic or Advanced.
Or
Select Add > IPV6 > Basic or Advanced.
The dialog box displays based on the selection of IPV4 or IPV6 with the Basic or Advanced
configuration.
3. Enter the Parameters value.
Or
Click Import to import the predefined parameter values in a comma-separated value (CSV) file.
4. (Optional) Click Preview to list the commands to be executed with replaced parameters.
5. Click OK.
The deployment details are displayed in the VRRP/VRRP-E Details pane of the Manage
VRRP/VRRP-E dialog box.
Deleting a VRRP/VRRP-E router
To delete a VRRP/VRRP-E router in an MLX device, perform the following steps.
1. Select Configure > VRRP/VRRP-E.
The Manage VRRP/VRRP-E dialog box is displayed.
2. Select the VRRP or VRRP-E mode and perform one of the following actions:
Select Delete > IPV4 > Basic or Advanced.
Or
Select Delete > IPV6 > Basic or Advanced.
The dialog box displays based on the selection of IPV4 or IPV6 with the Basic and Advanced
configuration.
3. Enter the Parameters value.
Or
Click Import to import the predefined parameter values in a comma-separated value (CSV) file.
4. (Optional) Click Preview to list the commands to be executed with replaced parameters.
5. Click OK.
The deployment details are deleted from the VRRP/VRRP-E Details pane of the Manage
VRRP/VRRP-E dialog box.