San connection utilization, San connection utilization 6 – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1718
1646
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN connection utilization
43
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
7. Click OK on the Confirm Threshold Changes dialog box.
SAN connection utilization
NOTE
Connection utilization is only supported on the following managed objects: E_Ports, F_Ports,
N_Ports, 10 GE_Ports and FCIP tunnels.
NOTE
Fabrics where performance data collection is not enabled display connections as thin black lines.
Performance connection utilization for device ports provides the following features:
•
Turns the utilization display on and off from the menu and toolbar.
•
Displays moving dotted colored lines that originate from a port.
•
Displays two lines in the topology (when turned on); one represents percentage utilization for
transmit and the other represents the percentage utilization for receive. The movement of the
line determines if it is a transmit or a receive.
-
Receive (Rx) — Line moves into a port.
-
Transmit (Tx) — Line moves out of a port.
•
Displays different colors to represent the percentage utilization range, as shown in
Figure 740
on page 1646.
FIGURE 740
Utilization Legend
The colors and their meanings are outlined in