Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1654)

1582 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Duplicating a deployment configuration
41
FIGURE 724 Task Scheduler dialog box
2. Select a deployment configuration in the Saved or Scheduled tab.
Policy-based routing configurations cannot be edited.
3. Click Edit.
A dialog box specific to the type of deployment displays. This is the same dialog box that was
used when the deployment was created.
4. Update the dialog box with the information you want to change.
Duplicating a deployment configuration
1. Select Configure > Task Scheduler.
The Task Scheduler dialog box displays.
2. Select a deployment configuration in the Saved or Scheduled tab.
NOTE
VLAN configurations and policy-based routing configurations cannot be duplicated.
3. Click Duplicate.
A dialog box specific to the type of deployment displays. This is the same dialog box that was
used when the original deployment was created.
4. Update the dialog box with any information you want to change.