Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 149)

Brocade Network Advisor SAN + IP User Manual 79
53-1003155-01
Default IP user credentials
3
FIGURE 20 Default Passwords
4. Enter a login prompt user name and password by selecting Read/Write Login Prompt from the
Credential Type list and completing the following steps.
FIGURE 21 Read/Write Login Prompt
a. Enter a unique label to identify the credentials in the Display Label field.
This label can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters.
b. Enter the user name in the User ID field.
c. Enter the user password in the Password field.
d. Click the right arrow button.
e. If the devices use multiple user names and passwords, use the Up or Down buttons to
place the most commonly used at the top of the Login Prompt list to make discovery run
more efficiently.