Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2005)

Brocade Network Advisor SAN + IP User Manual 1933
53-1003155-01
Event action definitions
48
4. Click Next to advance to the Events pane.
Selecting an event for an event action
To select an event for an event action, complete the following steps.
1. Select Monitor > Event Processing > Event Actions.
The Event Actions dialog box displays.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
Enter a name and description for the event action and select the Enabled check box.
3. Click Next to advance to the Events pane.
By default, the Events pane of the Add Event Action dialog box displays, shown in Figure 861 .
FIGURE 861 Add Event Action dialog box - Events pane
4. Select one of the following event types from the Show list:
• Traps (default)
• Application Events
• Pseudo Events
• Custom Events
• Snort® Message
Depending on what the event type you select, a box listing the available events or pseudo
events displays.
5. By default, the traps are grouped under the Fabric OS, Network OS, FastIron/ NetIron, and
Wireless root nodes and listed in the Available Traps list, under the folders for the MIB to which
they belong. You can limit the list by doing any of the following:
• Select one of the following options: