Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 275)

Brocade Network Advisor SAN + IP User Manual 205
53-1003155-01
Software Configuration
5
4. Enter the number of configurations to retain per product in the ConfigsRetainedPerProduct
field.
The maximum is 30 and the minimum is 5. The default is 20. When the system reaches the
maximum limit for a product, the oldest configuration is deleted and the new configuration is
saved. However, if a baselined configuration becomes the oldest configuration, the baselined
configuration is retained.
5. Select the DoBackupAfterResync check box to turn on product configuration backup after
re-synch is performed from the client.
6. Select the DoAdaptiveBackupForNOS check box to turn on product configuration backup after
every lazy polling interval time from the client.
7. Select the DoBackupOnRunningConfigChangeTrap check box to turn on product configuration
backup after receiving a running configuration change trap.
8. Select the DoBackupOnStartupConfigChangeTrap check box to turn on product configuration
backup after receiving a startup configuration change trap.
9. Select the DoPostdeploymentBackup check box to turn on product configuration backup after
a payload is deployed using the Configuration Wizard.
10. Select the DoPredeploymentBackup check box to turn on product configuration backup before
a payload is deployed using the Configuration Wizard.
11. Enter the number of days to keep product configuration backup files on the server in the
KeepDataForDays field.
The minimum duration is 7 days. The maximum duration is 365. The default is 30.
Reducing this parameter may result in expiring a large number of records on server restart and
lead to reduced performance. If millions of records are impacted, this may last several hours.
12. Click Apply or OK to save your work.
Configuring custom report preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the maximum number of records to display in HTML reports in the MaxRecordsToDisplay
field.
By default, 1000 records display, even if the event count is greater than 1000. You can enter a
value of from 10 (minimum) through 2000 (maximum) records.
4. Enter the maximum number of records to obtain from the database in the
MaxRecordsToFromDatabase field.
5. Click Apply or OK to save your work.
Configuring deployment preferences
1. Select Server > Options.
The Options dialog box displays.