Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 361
Brocade Network Advisor SAN + IP User Manual
289
53-1003155-01
Dashboard customization
7
•
Top value — The highest value in the table.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 325). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays the
address of the port:
•
RX Errors/sec — The number (error rate) of receive errors per second for the duration specified
in the monitor.
•
RX Errors — The number (error count) of receive errors.
•
TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.
•
TX Errors — The number (error count) of transmit errors.
Viewing additional details for the Top Port Errors monitor
1. Click the View Details icon.
A more detailed widget displays which includes the following data:
•
Scope — The scope configured for the dashboard.
•
Port — The port affected by this monitor. Click to launch the Port Page (refer to
on page 325). When you launch the Port page, the detailed view closes.
•
Connected_Port (where Connected_Port is Connected Port, Initiator, or Target) — Displays
the address of the port:
•
RX Errors/sec — The number (error rate) of receive errors per second for the duration
specified in the monitor.
•
RX Errors — The number (error count) of receive errors.
•
TX Errors/sec — The number (error rate) of transmit errors for the duration specified in the
monitor.
•
TX Errors — The number (error count) of transmit errors.
•
Product — The product affected by this monitor per second.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
2. Click the close (X) button.