Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 914)

842 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Network OS switches in VCS mode
20
Viewing VLAN classifiers and rules parameters on the Network OS switch
Table 93 describes the parameters that display on the View Switch dialog box - VLAN Classifiers
tab.
Viewing LLDP-DCBX parameters on the Network OS switch
Table 94 describes the LLDP profiles table (in global configuration) and the LLDP profiles.
TABLE 93 VLAN classifiers and rules configuration parameters on VCS switch
Field/Component Description
Available Rules Displays the following Available Rules information:
•
Rule ID — The rule identifier. Valid rule ID values are from 1 through
256.
•
Rule Type — Valid rule types are MAC (MAC address-based rule) and
Proto (802.1Q protocol-based rule).
•
Encapsulation — The encapsulation type
(ethv2/nosnaplic/snaplic). Encapsulation only displays a value
when Proto is selected as the rule type.
VLAN Classifiers Displays the following VLAN Classifier information:
•
Classifiers/Rules — A tree that displays the classifier nodes and
rules.
•
Rule Type — Valid rule types are MAC (MAC address-based rule) and
Proto (802.1Q protocol-based rule).
•
Encapsulation — The encapsulation type
(ethv2/nosnaplic/snaplic). Encapsulation only displays a value
when Proto is selected as the rule type.
TABLE 94 LLDP-DCBX configuration parameters on VCS switch
Field/Component Description
LLDP Profiles list Lists the currently available LLDP profiles, the profile parameters (name
and description) and whether the profiles are enabled or disabled.
LLDP Profile Parameters Displays the following details of the selected LLDP profile:
•
Mode — The Transmit and Received mode. Options include Both
Transmit and Received, Transmit Only, or Receive Only.
•
iSCSI Priority — The CoS priority value for iSCSI traffic. The value
range is from COS 0 through COS 7 and the default value is COS 4.
•
Hello — The hello interval time (in seconds) for the bridge. The value
range is from 4 through 180 and the default value is 30.
•
Multiplier — The multiplier (in seconds). The value range is from 2
through 10 and the default is 4.
•
Advertise — The following profiles that are configured to advertise.
-
Port Description
-
System Capabilities
-
System Name
-
System Description
-
Management IP Address
-
Dot 1
-
Dot 3
-
DCBX
-
FCoE Application
-
FCoE Logical Link
-
iSCSI Application