Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 81)

Brocade Network Advisor SAN + IP User Manual 11
53-1003155-01
Management server and client
1
Disconnecting users
To disconnect a user, complete the following steps.
1. Select Server > Active Sessions.
The Active Sessions dialog box displays.
2. Select the user you want to disconnect and click Disconnect.
3. Click Yes on the confirmation message.
The user you disconnected receives the following message:
The Client has been disconnected by User_Name from IP_Address at
Disconnected_Date_and_Time.
4. Click Close.
When you disconnect a client using the Active Sessions dialog box, the following event displays
in the Master Log: Disconnect Client User_Name @ IP_Address.
Viewing server properties
To view the Management application server properties, complete the following steps.
1. Select Server > Server Properties.
The Server Properties dialog box displays.
FIGURE 6 Server Properties dialog box
2. Review the information.
TABLE 4 Server Properties
Field/Component Description
Free Memory The amount of free memory on the server.
IP Address The IP address in IPv4 or IPv6 format.
Java VM Name The Java Virtual Machine name.