Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1505)

Brocade Network Advisor SAN + IP User Manual 1433
53-1003155-01
Unified image management
35
FIGURE 638 Firmware Management dialog box - Unified Firmware Images tab
The Unified Firmware Images tab contains the following buttons:
• Import — Opens a dialog box that allows you to browse and select the unified image file you
want to import into the Management application. Newly imported images are saved to the
Management application.
• Delete — Deletes the unified image from the Management application.
• View — Opens a dialog box that allows you to enter the location of the release notes or search
for the location of the release notes.
• Update — Updates the firmware images by way of the Firmware management dialog box.
Importing unified images into the Management application
The Import Firmware Image from File dialog box allows you to browse and select an image file and
add it to the Unified Firmware Images tab.
NOTE
If the Management application does not recognize the image, you must enter the following
information manually.
NOTE
Allowing for manual import is not supported for simplified NetIron and unified VDX images.
To import unified images into the Management application, perform the following tasks.
1. Obtain the unified image you need. Refer to “Obtaining software files” on page 1425.
2. Click the IP tab.
3. Select Configure > Firmware > Management.
4. From the Firmware Management dialog box, click the Unified Firmware Images tab.
5. Click Import.
The Import Firmware Image from File dialog box displays.