Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 249)

Brocade Network Advisor SAN + IP User Manual 179
53-1003155-01
Name settings
5
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Names in the Category list.
The SAN Names pane displays.
3. Select Set names to be unique to require that names be unique on your system.
4. Click OK on the Options dialog box.
5. Click OK on the “duplicate names may exist” message.
To fix duplicated names, refer to “Fixing duplicate names” on page 179.
Setting names to be non-unique
You can choose to allow duplicate names in your fabric.
To set names to be non-unique, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Names in the Category list.
3. Select Set names to be non-unique to allow duplicate names on your system.
4. Click OK on the Options dialog box.
Fixing duplicate names
To fix duplicated names, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Fix Duplicates.
The Duplicated Names dialog box displays ( Figure 69 ).