Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 721)

Brocade Network Advisor SAN + IP User Manual 649
53-1003155-01
Configuration file management
14
• Backup Type — Backup options include the following types:
- Discovery — The discovery backup is obtained after the discovery process.
- Event Triggered— Occurs when a trap is generated by the device during a
configuration change.
- Manual — Occurs when you click the Save Running/Startup Configuration button.
- Scheduled — Occurs when backup is obtained at the scheduled time.
4. Perform one of the following actions:
• Click the Refresh button to update the network and retrieve the latest data from the
database.
• Click the View button to compare the contents of the latest configuration and the baseline
configuration. You can view only one configuration at a time.
5. Click OK to save the configuration.
6. Click Cancel to exit the dialog box.
Replicating configurations
NOTE
This feature requires a Trial or Licensed version.
You can replicate a switch SNMP configuration, the Fabric Watch configuration, Trace Destination
configuration, or the entire configuration.
1. Select Configure > Configuration File > Replicate > Configuration.
A wizard is launched to guide you through the process. The first step of the wizard, Overview,
displays. There are seven steps in the Replicate Switch Configuration:
• Overview, which describes the wizard.
• Configuration Type, which allows you to select the type of configuration you wish to replicate.
For more information about the fields and components of this step, refer to
Table 58 on
page 650.
• Source Location, which allows you to select the location of the configuration you wish to
replicate. For more information about the fields and components of this step, refer to
Table 59
on page 650.
• Source Configuration, which allows you to select the source switch to replicate. For more
information about the fields and components of this step, refer to
Table 60 on page 650.
• Destination Switches, which allows you to select the destination switch. For more information
about the fields and components of this step, refer to
Table 61 on page 651.
• Validation, which lists the configuration settings that you can validate before you replicate. For
more information about the fields and components of this step, refer to
Table 62 on page 653.
• Summary, which lists the replication settings that successfully ran on all the selected
destination switches. For more information about the fields and components of this step, refer
to
Table 63 on page 653.
2. To proceed to the next step in the wizard, click Next. To return to the previous screen, click
Previous.