Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1971)

Brocade Network Advisor SAN + IP User Manual 1899
53-1003155-01
Configuration rules
47
The description cannot be over 1, 024 ASCII characters.
8. To edit a configuration block, repeat step 8 through step 10 of “Adding a configuration block”
on page 1896.
9. Click OK on the Edit Block dialog box.
10. Click OK on the Edit Configuration Rule dialog box.
11. Click OK on the Edit Monitor dialog box.
The updated configuration policy manager displays in the Monitors table of the Configuration
Policy Manager dialog box.
12. Click Close on the Configuration Policy Manager dialog box.
Deleting conditions and blocks
You can only delete user-defined conditions or blocks. Before you delete a user-defined condition
or block, you must remove it from any rules.
1. From the Add Configuration Rule or Edit Configuration Rule dialog box, select one or more
user-defined conditions or blocks you want to delete.
2. Click Delete.
3. Click Yes on the confirmation message.
4. Click OK on the Add Configuration Rule or Edit Configuration Rule dialog box.
Predefined blocks
The Management application provides predefined blocks.
Table 170 lists the predefined blocks that can be used in a configuration rule.
TABLE 170 Predefined blocks
Name Description Use
regular
expression Block Start Block End
Network OS TenGigabit Ethernet
Interfaces Processes all 10 Gigabit Ethernet
Interfaces on a Network OS device. Yes interface TenGigabitEthernet .* !
Network OS Gigabit Ethernet
Interfaces Processes all Gigabit Ethernet
Interfaces on a Network OS device. Yes interface GigabitEthernet .* !
Network OS Vlan Interfaces Processes all VLAN Interfaces on a
Network OS device. Yes interface Vlan .* !
Network OS LAG Interfaces Processes all LAG Interfaces on a
Network OS device. Yes interface Port-channel .* !
Network OS Protocol LLDP Processes the protocol LLDP block. No protocol lldp !
IronWare OS Ethernet Interfaces Processes all Ethernet ports on the
IronWare device. Yes interface ethernet .* !
IronWare OS VLAN Interface Processes VLANs on the IronWare
device. Yes vlan .* !