Viewing a port commissioning deployment report, Viewing a, Port commissioning deployment report – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 767
Brocade Network Advisor SAN + IP User Manual
695
53-1003155-01
Port commissioning
14
•
Date and Time — The date and time of the deployment.
•
Export — Select to export the results to CSV or HTML (refer to
“Exporting and saving a report to
•
Email — Select to e-mail the results (refer to
“E-mailing a report”
on page 696).
•
Configuration Name — Name of the deployment.
For example, Decommission/Recommission - switch_name, Decommission/Recommission -
switch_name - blade, or Decommission/Recommission - switch_name - Ports.
•
Product — The product name.
•
Status — The status of the deployment. For example, Success or Failed.
•
Reason — The port level status of the decommission or recommission. Also, provides the
following data for each CIMOM server associated with the port:
-
IP Address — The IP address of the CIMOM server.
-
Reason — The deployment request and whether it was successful or not.
-
Status — The status of the deployment. For example, Allowed or Failed.
•
A list of any CIM errors that occurred during the port commissioning.
Here are a couple of examples of the possible CIM errors:
CIM_ERR_FAILED: A general error occurred that is not covered by a more specific error code.
CIM_ERR_ACCESS_DENIED: Access to a CIM resource was not available to the client.
CIM_ERR_INVALID_NAMESPACE: The target namespace does not exist.
Viewing a port commissioning deployment report
To access a port commissioning deployment report, complete the following steps.
1. Select Configure > Task Scheduler.
The Task Scheduler dialog box displays.
2. Click the Log tab.
A list of deployment configurations that are executed and the status of each displays.
3. Select the port commissioning deployment report you want to view and click Report.
4. Review the contents of the port commissioning deployment report.
The Configuration Deployment report contains the following parameters:
•
Configuration Name — Name of the deployment.
For example, Decommission/Recommission - switch_name,
Decommission/Recommission - switch_name - blade, or Decommission/Recommission -
switch_name - Ports.
•
Description — A description of the deployment.
•
Module — The module name. For example, Port Commission.
•
Sub Module — The sub module name.
•
Deployment Time — Time when the deployment occurred. Click to launch the detailed
deployment results.