Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 507)

Brocade Network Advisor SAN + IP User Manual 435
53-1003155-01
User-defined performance monitors
8
- SCSI

Read Frame Count (frames) — The SCSI read command frame count as reported in the
last data point received for the flow.

Write Frame Count (frames) — The SCSI write command frame count as reported in
the last data point received for the flow.

Read Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Write Frame Rate (f/s) — The SCSI write frame rate per second as reported in the last
data point received for the flow.

Read Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Write Data (Bytes) — The SCSI read data in bytes as reported in the last data point
received for the flow.

Read Data Rate (Mbps) — The SCSI read frame in megabytes per second rate as
reported by the last data point.

Write Data Rate (Mbps) — The SCSI write frame rate in megabytes per second as
reported by the last data point.
- Frame

Transmit Frame Count (frames) — The transmit frame count as reported in the last
data point received for the flow.

Receive Frame Count (frames) — The received frame count as reported in the last data
point received for the flow.

Transmit Frame Rate (f/s) — The transmit frame rate per second as reported in the
last data point received for the flow.

Receive Frame Rate (f/s) — The received frame rate per second as reported in the last
data point received for the flow.

Transmit Word Count (bytes) — The transmit word count in bytes as reported in the last
data point received for the flow.

Receive Word Count (bytes) — The received word count in bytes as reported in the last
data point received for the flow.

Transmit Throughput (Mbps) — The transmit throughput in megabytes per second as
reported by the last data point.

Receive Throughput (Mbps) — The received throughput in megabytes per second as
reported by the last data point.

Generator Transmit Frame Count (frames) — The transmit frame count as reported in
the last data point received for the flow.

Generator Receive Frame Count (frames) — The received frame count as reported in
the last data point received for the flow.

Mirrored Frames Count (frames) — The mirrored frame count as reported in the last
data point received for the flow.

Mirrored Tx Frames (frames) —The mirrored transmit frame count as reported in the
last data point received for the flow.

Mirrored Rx Frames (frames) —The mirrored received frame count as reported in the
last data point received for the flow.