Ip preferences, Preferences – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 273

Advertising

Brocade Network Advisor SAN + IP User Manual

203

53-1003155-01

Software Configuration

NOTE

If your Operating System is IPv4-enabled or IPv6-enabled (dual mode), the server binds using IPv4
address by default.

NOTE

IPv6 only mode does not support server to client communication (the IPv6 address cannot be bound
to the server).

To configure the IP address to override the default RMI server host IP address, complete the
following steps.

NOTE

This configuration option replaces the -Djava.rmi.server.hostname value used in previous releases.

1. Select Server > Options.

The Options dialog box displays.

2. Select Client/Server IP in the Category list to set the IP address.

3. Choose one of the following options in the Server IP Configuration list.

•

Select All. Go to

step 4

•

Select a specific IP address. Continue with

step 5

•

Select localhost. Continue with

step 5

4. Select the return IP address in the Client - Server IP Configuration Return Address list.

When Server IP Configuration is set to All, you can select any available IP address as the
Return Address. If you select a specific IP address, the Return Address field shows the same IP
address and you cannot change it.

5. Click Apply or OK to save your work.

NOTE

Changes take effect after you restart the Management Server.

NOTE

You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).

6. Click OK on the “changes take effect after “application restart” message.

IP preferences

You can configure the following preferences for IP products.

•

Configuring change manager preferences . . . . . . . . . . . . . . . . . . . . . . . . . 204

•

Configuring custom report preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

•

Configuring deployment preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

•

Configuring deployment report preferences . . . . . . . . . . . . . . . . . . . . . . . . 206

•