Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 752
680
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Ports
14
Status icons:
Warning icon — One of the five parameters exceeds the threshold of that parameter.
The corresponding parameter field displays with a yellow background.
No icon — No parameters exceed the threshold of that parameter.
Unknown icon — The port is not a 16 Gbps capable port or the device is running
Fabric OS 6.4.X or earlier.
Error icon — Unable to retrieve status of the supported port.
•
Slot/Port # — The slot and port number of the selected fabric. The port number includes
the type of port (FC, TE, GE, or XGE).
•
FC Address — The Fibre Channel address of the port.
•
TX Power — The power transmitted to the SFP in dBm and uWatts.
NOTE
The uWatts display requires devices with Fabric OS 6.1.0 and later. Devices running
Fabric OS 6.0.0 and earlier only display dBm.
•
RX Power — The power received from the port in dBm and uWatts.
NOTE
The uWatts display requires devices with Fabric OS 6.1.0 and later. Devices running
Fabric OS 6.0.0 and earlier only display dBm.
•
Transceiver Temp (C) — The temperature of the SFP transceiver.
•
Voltage (mVolts) — The voltage across the port in mVolts.
•
Transceiver Current (mAmps) — The laser bias current value in mAmps.
•
Powered on Years (Hours) — The powered on time in years and hours for 16 Gbps capable
ports. Empty for unsupported ports.
NOTE
Requires a 16 Gbps capable port running Fabric OS 7.0 or later.
•
FC Speed (GB/s) (Fabric OS 7.0 or later) — The FC port speed; for example, 4 Gbps.
•
FC Speed (MB/s) (Fabric OS 6.4 or earlier) — The FC port speed; for example, 400 Mbps.
•
Distance — The length of the fiber optic cable.
•
Vendor — The vendor of the SFP.
•
Vendor OUI — The vendor’s organizational unique identifier (OUI).
•
Vendor PN — The part number of the SFP.
•
Vendor Rev — The revision number of the SFP.
•
Serial # — The serial number of the SFP.
•
Data Code — The data code.
•
Media Form Factor — The type of media for the transceiver; for example, single mode.
•
Connector — The type of port connector.
•
Wave Length — The wave length.
•
Encoding — Displays how the fiber optic cable is encoded.
3. To view port properties, select a row and click Properties.