Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 617)

Brocade Network Advisor SAN + IP User Manual 545
53-1003155-01
Customizing the MRP Topology map
10
3. Repeat step 2 until you have repositioned all nodes.
4. Click Save on the MRP Topology map toolbar to retain the changes you made.
Customizing the MRP Topology map
To customize the MRP Topology map, complete the following steps.
1. Click Options on the MRP Topology map tool bar.
The MRP Topology Options dialog box displays.
FIGURE 232 Topology Options dialog box
2. Change the background color by completing the following steps:
a. Click the ellipsis button in the Background Color row.
b. Select the color you want.
c. Click OK.
3. Click the Grid Size row and select the size you want (5, 10, 15, or 20) from the list.
4. Select the Grid Visibility check box to make the grid visible in the topology map.
Clear the check box to not display a grid.
5. Select the Link Information Visibility check box to make the forwarding and receiving port
number data visible in the topology map.
6. Change the starting point of a MRP Topology Map by completing the following steps:
By default, the first entry on the Product List is the starting point of a view. For example, if
Ring 2 is the first ring on the Product List, then Ring 2 displays when you open the
MRP Topology map.
a. Click the Starting Point row.
b. Enter the ring ID, for example, Ring 1.