Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1647)

Brocade Network Advisor SAN + IP User Manual 1575
53-1003155-01
Creating key passwords
40
FIGURE 721 Deploy Certificates/Keys dialog box
4. Select a product from the Available Targets list.
5. Use the right arrow button to move the selected product to the Selected Targets list.
6. Click OK.
The certificate and key selected from the Certificate View tab are deployed to the selected
products.
Related topic
“SSL certificate configuration”
Creating key passwords
You can create candidate key passwords used when importing SSL keys from a ServerIron product
using the following procedure.
1. Select Configure > Application Delivery > SSL Certificates.
The SSL Certificates dialog box displays.
2. From the Certificate View tab, click Key Passwords.
The Key Passwords dialog box displays ( Figure 722 ).