Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1417)

Brocade Network Advisor SAN + IP User Manual 1345
53-1003155-01
VRRP-E: VRRP/ VRRP-E management
31
FIGURE 601 Selecting VRRP/VRRP-E
The Manage VRRP/VRRP-E dialog box is displayed (as shown in Figure 602 ). The Manage
VRRP dialog box provides the following buttons to perform various functions.
- Add — Adds the VRRP/VRRP-E router configuration.
- Delete — Deletes the VRRP/VRRP-E router configuration.
FIGURE 602 Manage VRRP/VRRP-E dialog box
Adding a VRRP/VRRP-E router
To add a VRRP/VRRP-E router in an MLX device, perform the following steps.
1. Select Configure > VRRP/VRRP-E.
The Manage VRRP/VRRP-E dialog box is displayed.
NOTE
The VRRP/VRRP-E mode is selected as per the existing configuration. If no configuration exists, the
default mode is VRRP.
2. Select the VRRP or VRRP-E mode and perform one of the following actions: