Comparing product configurations – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1431
Brocade Network Advisor SAN + IP User Manual
1359
53-1003155-01
Configuration file manager
32
•
Previous button — Click to display the previous configuration (from current choice) in the
Configurations list.
•
Next button — Click to display the next configuration (from current choice) in the
Configurations list.
•
Export button — Click to export the currently viewed configuration to a text file.
Comparing product configurations
The Comparison dialog box allows you to display the contents of two configurations side-by-side. To
compare two configurations, perform the following steps.
1. Click the IP tab.
2. Select Configure > Configuration File > Configuration File Manager.
3. Click the Product Configurations tab.
4. Select a product to view the configurations.
5. Select two configurations and click Compare.
The Compare dialog box displays, as shown in
.
FIGURE 609
Compare dialog box
The Compare dialog box displays the following information:
•
Product — The IP address of the device.
•
Date — The Displays the date the device configuration was taken.