Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 427)

Brocade Network Advisor SAN + IP User Manual 355
53-1003155-01
Reports
7
Switch Report
The Switch Report provides a information about the selected switch and ports.
Table 31 describes the fields and components of the Switch Report. For general report content and
table functions, refer to “Report content and functions” on page 361.
TABLE 31 Switch Report fields and components
Field/Component Description
Switch Details table
Name The name of the switch.
WWN The world wide name of the switch.
IP Address The IP address (IPv4 or IPv6 format) of the physical switch.
Model The model of the switch.
State The state for the switch. For example, online or offline.
Operational Status The operational status of the switch. For example, healthy, operational, degraded, marginal,
down, failed, unknown, or unreachable.
Previous Operational Status The previous operational status of the switch.
Vendor The vendor name.
Type Whether the device is virtual, physical, or NPIV.
Firmware Version The firmware version of the switch.
AG Mode Whether or not the switch is running in AG mode.
Domain ID The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is
the actual value on the wire.
Port Count The number of ports on the switch.
Occupied Port Count The number of occupied ports on the switch.
Free Port Count The number of free ports on the switch.
Unlicensed Port Count The number of unlicensed ports on the switch.
Initiator Count The number of initiator ports on the switch.
Target Count The number of target ports on the switch.
Initiator/Target Count The number of initiator and target ports on the switch.
Unreachable Time The date and time the switch became unreachable.
Last Update Time The date and time when the information for the switch was last updated.
Switch Ports table
IP Address The IP address (IPv4 or IPv6 format) of the switch port.
Switch Name The name of the switch.
Domain ID/Port # The domain ID for the switch and port number.
Connected Device details The information about the device connected to this port.
Device Name The name of the connected device.
Device Vendor The vendor name of the connected device.
Role The role of the connected device (such as initiator).