Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 276)

206 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Software Configuration
5
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of days to retain deployment records in the Expiration.DaysToKeep field.
The minimum is 1 and the maximum is 366. The default is 180.
4. Click Apply or OK to save your work.
Configuring deployment report preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of Deployment Executions to show in a Deployment Report in the
NumberOfDeploymentExecutionsToDisplay field.
The minimum is 10 and the maximum is 1000. The default is 50.
4. Click Apply or OK to save your work.
Configuring IP device manager preferences
This configuration is only applicable to the Ethernet router series switch running firmware version
5.4 or later.
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Enter the number of Element Managers that can be launched from the Management
application in the LaunchLimitforElementManagerGUI field.
The minimum is 1. The maximum is 6. The default is 4.
4. Click Apply or OK to save your work.
Configuring image repository preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.
3. Select the AllowManualImports check box to turn on launching the Manual Image Import
dialog box when you select an image that is not recognized as valid image format.
4. Click Apply or OK to save your work.
Configuring MPLS management preferences
1. Select Server > Options.
The Options dialog box displays.
2. Select IP Preferences from the Software Configurations list in the Category pane.