Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 58)

lxii Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IronWare hardware and software support
The following firmware platforms are supported by this release of Network Advisor 12.3.0:
Brocade DCX-4S with FC8-16, FC8-32, and
FC8-48 Blades
4-slot Backbone Chassis with 8 Gbps 16-FC port,
8 Gbps 32-FC port, and 8 Gbps 48-FC port
blades Fabric OS v6.2.0
Brocade DCX-4S with FC8-64 Blades 4-slot Backbone Chassis with 8 Gbps 64-FC port
blades Fabric OS v6.4.0
Brocade DCX-4S with FR4-18i Blades 4-slot Backbone Chassis with 4 Gbps Router,
Extension blade Fabric OS v6.2.0
Brocade DCX-4S with FC10-6 Blades 4-slot Backbone Chassis with FC 10 - 6 ISL Blade Fabric OS v6.2.0
Brocade DCX-4S with FS8-18 Blades 4-slot Backbone Chassis with Encryption Blade Fabric OS v6.1.1_enc or later
Brocade DCX-4S with FX8-24 Blades 4-slot Backbone Chassis with 8 Gbps 12-FC port,
10 GbE ports, 2-10 GbE ports blade Fabric OS v6.3.1_CEE
Brocade DCX-4S with FCoE10-24 Blades 4-slot Backbone Chassis with 10 Gbps 24-port
FCoE blade Fabric OS v6.3.0 or later
Brocade DCX 8510-4 16 Gbps 4-slot Backbone Chassis Fabric OS v7.0.0 or later
Brocade DCX 8510-8 1, 2 16 Gbps 8-slot Backbone Chassis Fabric OS v7.0.0 or later
Brocade Encryption Switch 8 Gbps Encryption Switch Fabric OS v6.1.1_enc or later
FS8-18 Encryption Blade Encryption Blade
FA4-18 Application Platform Blade Application Platform Blade
FC8-16 Blade FC 8 GB 16-port Blade
FC8-32 Blade FC 8 GB 32-port Blade
FC8-48 Blade FC 8 GB 48-port Blade
FC8-64 Blade FC 8 GB 64-port Blade
FC10-6 Blade FC 10 - 6 ISL Blade
FC8-32E blade 3 8 Gbps 32-port blade Fabric OS v7.0.1 or later
FC8-48E blade 3 8 Gbps 48-port blade Fabric OS v7.0.1 or later
FC16-32 Blade 16 Gbps 32-port blade Fabric OS v7.0.0 or later
FC16-48 Blade 16 Gbps 48-port blade Fabric OS v7.0.0 or later
FC16-64 Blade 3 16 Gbps 64-port blade Fabric OS v7.0.0 or later
FCoE10-24 Blade 10 Gbps FCoE Port Router Blade
FX8-24 Blade 1, 2 8 Gbps Extension Blade
1 Professional can discover but not manage this device. Use the device’s Element Manager, which can be launched from the Connectivity
Map, to manage the device. This device cannot be used as a Seed switch.
2 Professional Plus Trial and Licensed version can discover but not manage this device. Use the device’s Element Manager, which can be
launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed switch.
3 Only supported on the DCX 8510-4 and DCX 8510-8 chassis.
TABLE 1 Fabric OS-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required