Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 186)

116 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Individual IP device discovery
3
7. Change the SNMPv1 and SNMPv2c read-write credentials by completing the following steps.
a. Click the SNMPv1/v2c Read/Write. tab
FIGURE 46 SNMPv1/v2c settings
b. Enter the unique community string in the Community field.
The community string can be from 1 through 16 characters long, case sensitive, and
allows all printable ASCII characters. The string displays as asterisks.
NOTE
If you do not enter a community string in the field, discovery uses the "public" and "private"
community strings to probe the devices.
8. Change the SNMPv1 and SNMPv2c read only credentials by completing the following steps.
a. Click the SNMPv1/v2c Read Only tab.
b. Enter the unique community string in the Community field.
The community string can be from 1 through 16 characters long, case sensitive, and
allows all printable ASCII characters. The string displays as asterisks.
NOTE
If you do not enter a community string in the field, discovery uses the "public" and "private"
community strings to probe the devices.
9. Change the Read/Write credentials by completing the following steps.
a. Click the Read/Write Credentials tab.
FIGURE 47 Read/Write credentials
b. Enter the password in the Super-User Password field.