Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1627)

Brocade Network Advisor SAN + IP User Manual 1555
53-1003155-01
Controller configuration
39
a. Click Add to launch the Controller Configuration dialog box, which you use to deploy a
policy to a GSLB ServerIron ADX product that is the GSLB controller.
b. Select an existing controller configuration and click Edit to modify an existing controller
definition.
c. Select an existing controller configuration and click Duplicate to create a controller
configuration by copying an existing one.
d. Select an existing controller configuration and click Delete to remove it from the Controller
Configuration list.
e. Click Deploy to deploy the selected controller configuration from the list.
NOTE
All configuration options on the Controller Configuration tab are deployed to the selected GSLB
controller, but only the GSLB Communication Port and Enable Logging parameters are
deployed to site GSLB ServerIron ADX products.
Creating a new GSLB controller configuration
1. Select Configure > Application Delivery > GSLB.
1. Click the Controller Configuration tab of the GSLB dialog box to view the controller definitions
that have been defined for the system.
2. Click Add to create a new GSLB controller configuration, or select an existing GSLB controller
configuration and click Edit or Duplicate.
The Controller Configuration dialog box displays, as shown in Figure 712 .