Clearing l3 acl assignments – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 982
910
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Layer 3 access control list policy
22
a. Select the Assign ACL option and choose one of the following options from the first Assign
ACL list:
•
Select ACLs on this Product to assign ACLs deployed on the product to the port.
The second list is populated with the ACLs deployed on the switch or associated with a
save deployment object.
•
Select ACLs bound to this port to assign ACLs bound to the interface to the port.
The second list is populated with the ACLs bound to the interface.
•
Deployment_Name — Select to assign a user-configured deployment on the port.
b. Select the ACL you want to assign to the port from the second Assign ACL list.
For Ethernet router products runing IronWare 5.4 or later, you can assign ACLs to IPv4 and
IPv6 ports. To assign the ACL to an IPv4 port, select the IPv4 check box and select an ACL
from the IPv4 list. To assign the ACL to an IPv6 port, select the IPv6 check box and select
an ACL from the IPv6 list.
c. Select the Write to Product check box to create the selected ACL on the device if it does not
already exist.
7. Click OK on the Device_Name - Port_Number - ACL Port Configuration dialog box.
The Deploy to Ports - L3 ACL dialog box displays. To deploy the configuration, refer to
Clearing L3 ACL assignments
NOTE
For Ethernet router products running 5.4 or later, if the selected port has an IPv6 ACL assigned, the
ACL bound to the port field displays “0”. You cannot clear the ACL on this port.
To clear L3 ACL configuration from interfaces, complete the following steps.
1. Select Configure > Security > L3 ACL > Port.
The Port Selection - L3 ACL dialog box displays.
2. Select a port in the Available Ports list and click the right arrow button.
3. Click OK.
The Device_Name - Port_Number - ACL Port Configuration dialog box displays.
4. To clear inbound messages, complete the following steps:
a. Select the Inbound check box.
b. Select the Clear ACL Assignment option.
5. To clear outbound messages, complete the following steps:
a. Select the Outbound check box.
b. Select the Clear ACL Assignment option.
6. Click OK on the Device_Name - Port_Number - Layer 3 ACL Configuration dialog box.
The Deploy to Ports - L3 ACL dialog box displays. To deploy the configuration, refer to