Discovering hosts by network address or host name – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 190
120
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Host discovery
3
1. Import the host certificate when the Enable Certificate Validation check box is selected.
Discovery will occur successfully even without importing the certificate when the Enable
Certificate Validation checkbox is not selected.
2. Restarting the Server Management Console (SMC) is necessary whether the Enable Certificate
Validation check box is selected or not.
3. Refer to
“Discovering Hosts by network address or host name”
on page 120 to configure
discovery authentication in the Add Host Adapters dialog box.
Discovering Hosts by network address or host name
To discover a Host by network address or host name, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
FIGURE 50
Discover Host Adapters dialog box
2. Click Add.
The Add Host Adapters dialog box displays.