Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1495)

Brocade Network Advisor SAN + IP User Manual 1423
53-1003155-01
CLI configuration scheduling
34
Configuring a daily deployment schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the deployment schedule, return to step 8 of “Creating a new product
configuration” on page 1397.
Configuring a weekly deployment schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Week list.
To finish configuring the deployment schedule, return to step 8 of “Creating a new product
configuration” on page 1397.
Configuring a monthly deployment schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
To finish configuring the deployment schedule, return to step 8 of “Creating a new product
configuration” on page 1397.