Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2126)

2054 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Upload failure data capture
51
4. Choose one of the following options:
• Select the Use Management_Application option to use the Management application FTP
server.
• Select the Custom option and complete the following steps to configure a FTP server for
the selected device.
a. Enter the server’s IP address in the Host IP field.
b. Enter a user name for the server in the User Name field.
c. Enter a password for the server in the Password field.
d. Enter the path to where the trace dump data is saved in the Directory Path field.
5. Click Test to test the server credentials.
6. Click OK on the Change FTP Host dialog box.
7. Click OK on the Upload Failure Data Capture dialog box.
8. Click OK on the confirmation message, if necessary.
Saving the upload failure data capture repository
NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > View Repository.
The Repository dialog box displays.
2. Select the Switches tab to view upload failure data capture information.
3. Select the trace dump file you want to save and click Save.
4. Browse to the location you want to save the file and click OK.
5. Click OK on the Repository dialog box.