Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2267)

Brocade Network Advisor SAN + IP User Manual 2195
53-1003155-01
IP device properties
E
IP device properties
You can view device and port properties from any view in the IP Topology.
You can customize the device and fabric Properties dialog boxes to display only the data you need
by creating user-defined property labels (refer to
“Adding a property field” on page 2211).
You can also edit property fields to change information. Fields containing a green triangle ( ) in
the lower right corner are editable.
Viewing IP device and port properties
To view properties for a device, complete the following steps:
1. Select one of the following view types from the view list on the Product List toolbar.
• Network Object
• IP Topology
• L2 Topology
• Ethernet Fabrics (refer to “Viewing VCS fabric properties” on page 2199)
• VLAN Topology
2. Right-click the device in the Product List and select Properties.
The Device_Name Properties dialog box displays.
3. Review the device and port properties.
To add user-defined property labels, refer to “Adding a property field” on page 2211.
Fields containing a green triangle ( ) in the lower right corner are editable.
NOTE
Some fields are not available for all products.
TABLE 232 IP device and port properties
Field/Component Description
Properties tab Select to display information about the device.
Detailed Report button Click to launch the detailed product report.
Name The name of the product.
Alias The alias.
Host Name The host name.
System Name The system name.
IP Address The IP address (IPv4 or IPv6 format) of the product.
System OID The system's object identifier.
Product Type The type of device.
VCS Mode Whether or not the device is in VCS mode.
VCS ID The VCS ID number for the fabric.
Node Count The number of nodes in the fabric.