Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2148)

2076 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Exporting IP reports to e-mail recipients
52
AP Products report
The AP Products report provides data on the access points for wireless controllers.
The AP Products report has the parameters described in Table 193 .
FC Ports This table contains the following information for each FC interface on the product:
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Port WWN — The world wide name of the port.
•
Area ID/Port Index — The area identifier and port index of the port.
•
Type — The type of port.
•
Port Speed (Gb/s) — The speed of the port.
•
Trunked — Whether the port is trunked.
•
Trunk Index — The trunk index of the port.
Physical Ports -
Realtime The name of the device with drill-down support. When you click on the name, the “IP
Physical Ports - Realtime report” launches (refer to
“IP Physical Ports - Realtime report”
on page 2080).
Physical Media -
Realtime The name of the device with drill-down support. When you click on the name, the “IP
Physical Media - Realtime report” launches (refer to
“Physical Media - Realtime report”
on page 2081).
Virtual Interfaces A list of identifiers for the virtual interfaces.
Loopback Interfaces A list of identifiers for the loopback interfaces.
Chassis Inventory This table contains the following information for the chassis:
•
Type — The type of chassis.
•
Name — The name used to identify the chassis.
•
Description — A description of the chassis
•
Serial Number — The serial number of the chassis.
Software Licenses The name of the software licenses assigned to the product.
•
Node Name — The name of the node.
•
Licensed Feature — The name of the licensed feature.
•
License Key — The license key for the feature (displays as asterisks).
TABLE 193 AP Products report fields and components
Field/Component Description
AP Products Count The number of access points attached to the selected device.
Product Status Whether the AP is online (green icon), offline (red icon), or pending adoption (gray
icon).
Name The device name used to identify AP.
Connected Switch IP address of the controller or switch connected to the AP. Also displays the port
number if the AP is directly connected.
Controller IP address of the controller which manages the AP. Also displays the port number if
the AP is directly connected.
Cluster Name The controller cluster name. Click to view the controller cluster details.
MAC Address The AP device MAC address.
Model The model of the AP.
TABLE 192 Detailed Cluster Report fields and components (Continued)