Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1744)

1672 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
IP historical performance monitoring
43
Adding third-party device MIB objects manually
To add a third-party device MIB object manually, complete the following steps.
1. Copy the third-party device MIB objects to the Install_Home\conf\mibs\ip directory.
2. Go to Install_Home\conf\mibs and open the mibs_to_compile.txt file in a text editor.
3. Add the MIB file names to the mibs_to_compile.txt file.
4. Save and close the mibs_to_compile.txt file.
5. Launch the MIB Objects dialog box to view the third-party device MIB objects. Refer to “Adding
or editing a historical data collector” on page 1665.
Configuring a MIB walk instance
To configure a MIB walk instance, complete the following steps.
1. Launch the MIB Index dialog box. Refer to “Adding or editing a historical data collector” on
page 1665.
2. Select an MIB object from the MIB Instance list and click MIB Walk.
The MIB Walk dialog box displays all existing instances of the selected MIB on the selected
product.
FIGURE 755 MIB Walk dialog box
3. Select an instance from the list and click Add Instances to add the selected index to the list.
4. Select an instance from the list and click Set Instances to override the existing index with the
selected index.
5. Click Close to close the MIB Walk dialog box.
Duplicating a historical data collector
You can create a new data collector by duplicating an existing data collector, changing the name,
and editing any values in the duplicate that you want to change.