Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1874)

1802 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Predefined flow definition templates
44
3. Clear the Monitor check box.
4. Select the Mirror check box.
5. Select the Local Flow Mirror option. By default, CPU Mirroring is enabled.
6. Select the Persist over switch reboots check box to persist this flow definition over reboots.
7. Select the Activate all selected features check box to immediately activate the flow after
creation.
8. Enter the source device (H1) in the Source field.
9. Enter an asterisk (*) in the Destination field.
10. Enter the mirror port number in the Mirror field or click the ellipsis button to select a port from
the list.
Only supported on 16 Gbps-capable ports on devices running Fabric OS 7.3 or later.
To select a port from a list, refer to “Selecting a mirror port from a list of available ports” on
page 1747".
11. Enter the frame type (scsismd) in the Frame Type field.
To select a frame type from a list, click the ellipsis button. Refer to “Flow frame type
parameters” on page 1729" for a list of the supported frame type parameters.
12. Click OK to save the flow definition.
When the flow definition activates, the Flow Vision dialog box displays with the new flow
selected (highlighted) in the Flow Definitions table. To review the sub-flow data for the selected
flow, refer to
“Monitoring a Flow Mirror flow” on page 1793".
Predefined flow definition templates
The Management application provides predefined flow templates that are available when you
select a switch port, an initiator port, or a target port.
NOTE
The predefined flow templates are not supported on switches, storage arrays, or host groups.
Table 159 lists the predefined flow templates available by port type.
TABLE 159 Predefined templates
Port type Template name Platform support Required Fabric OS version
16 Gbps-capable port blade 8 Gbps-capable port blade
Host Port Node Learn Flows from Host Supported Not Supported v7.2.0 or later
Learn Flows on Port Supported Not Supported v7.2.0 or later
Monitor All Flows from Host Supported Supported v7.2.0 or later
Monitor Flows to LUN Supported Supported v7.2.0 or later
Local Flows Mirroring Supported Not Supported v7.3.0 or later