Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1619)

Brocade Network Advisor SAN + IP User Manual 1547
53-1003155-01
GSLB policy management
39
FIGURE 707 Policy Configuration dialog box - Prefix tab
3. Enter the IP address and select a location from the Location list.
If you select NONE for the location, the prefix is considered static. If you select any other
location, the prefix is considered geographical (Geo). Static prefixes never age out, but
geographical prefixes are dynamic and can age out.
Deleting a prefix from the Prefix list
1. Click the Prefix tab on the Policy Configuration dialog box.
2. Select a row in the Geo Prefix/Static Prefix list.
3. Click Delete.
Importing IP addresses from a file
1. Select Configure > Application Delivery > GSLB.
2. Click the Policy Configuration tab.
3. In the Geo Prefix/Static Prefix list, click Import.
The List of Prefix Networks and Location dialog box displays.
4. Click Import on the Prefix tab of the Policy Configuration dialog box.
The List of Prefix Networks and Locations dialog box, shown in Figure 708 , displays.