Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1924)

1852 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
PoE thresholds
46
7. Select the time period to be monitored for the number of threshold events in the Interval (min)
list.
The time period starts with the first event and runs its full duration if the event limit is not
reached. Interval values, in minutes, include:
• 15
• 30
• 60
Click Refresh on the Power Center dialog box to determine if any thresholds are triggered.
8. Click Add.
The new threshold displays in the All Thresholds list.
9. Select the Enabled check box of the new threshold in the All Thresholds list to enable the
threshold on the product.
10. Click Close to close the Thresholds dialog box.
11. Click Close to close the Power Center dialog box.
Adding a PoE port threshold
To create a threshold for a PoE port, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select a port in the PoE Product list and click Thresholds.
The Thresholds dialog box displays.