Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1500)

1428 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Boot image management
35
d. Enter the label for the image in the either the Image Label field or the User Defined
Label field.
These fields allow from 1 through 32 alphanumeric characters and allow the following
special characters: underscore (_), period (.), and hyphen (-).
The image file name excludes the file extension. For example, if the file name is
M2B07504.bin, the Image Label is M2B07504.
Enter additional information for the image in the User Defined Label field. This entry
appears under the More Information column of the Boot Images list of the Firmware
Management dialog box.
e. Click OK on the Import Boot Image dialog box.
If the imported file already exists or the import operation fails for any reason, a
message displays with details.
8. Click OK.
Deploying boot images to products
The Management application stores previously imported boot and monitor images from IronWare
products. These images can be placed in a boot image payload and deployed to products using the
Firmware Management dialog box.
Deleting boot images from the Management application
If a boot or monitor image must be deleted from the Management application, complete the
following steps.
1. Click the IP tab.
2. Click the Boot Images tab on the Firmware Management dialog box.
3. Select the boot image that you want to delete.
4. Click Delete.
A confirmation warning displays.
5. Click Yes to continue with the delete, or No to cancel it.