Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 586)

514 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Network Objects view
9
1. Select Network Objects from the view list on the Product List toolbar.
2. Click Filter.
The Product Filter dialog box displays. Only the categories or objects listed under the Selected
Categories list display on the Network Objects Product List. Available categories include:
• Contact — Lists the contact name for the discovered products.
• Firmware — Lists the firmware on the discovered products.
• Location — Lists the location of the discovered products.
• Model — Lists the models of the discovered products.
• Product Type — Lists the types of discovered products.
3. Select the Enable filter check box.
4. Filter the Product List by product status by selecting one or more of the following check boxes:
• Reachable
• Degraded Link
• Not Reachable
• Unhealthy
• Healthy
• Marginal
• Down
By default, all product status types are included. Clear the check mark from each status type
you do not want to include in the filter.
5. Add a category or object within the category to the filter by selecting the category or object in
the Available Categories list and clicking the right arrow button.
6. Remove a category or object from the filter by selecting the category or object in the Selected
Categories list and clicking the left arrow button.
7. Click OK.
The updated Product List contains only the selected categories and objects. The Filter check
box displays with a check mark.
Clearing the Network Objects Product List filter
To clear the filter and display all discovered devices in the Network Objects Product List, clear the
Filter check box.
The updated Product List contains only all discovered devices as well as all product groups and
port groups.