Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 734)

662 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Switch password management
14
NOTE
You should change the switch password before the expiriration date; however, if the switch password
expires, you must provide valid credentials in the Discovery dialog box.
Changing the switch password
To change the switch password, complete the following steps.
1. Select Configure > Switch Password.
The Manage Switch Password dialog box displays, as shown in Figure 272 .
FIGURE 272 Manage Switch Password dialog box
The Manage Switch Password dialog box includes the following components:
• Available Switches table — Displays the switches available in the current view of the
application.
• Selected Switches table — Displays the selected switches.
• Results table — Displays the users associated with the selected switches.
2. Select the switches for which you want to change the switch password from the Available
Switches table.
NOTE
You cannot change the switch password for unmanaged switches.
3. Click the right arrow to move the selected switches to the Selected Switches table.