Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1556)

1484 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
LSP
37
FIGURE 673 Delete RSVP Configuration wizard
5. Click a series of Next buttons to deploy the payload.
Editing a saved LSP configuration
You can edit a saved LSP configuration by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the Saved Configuration tab.
3. Select the saved configuration
4. Click the Edit button.
Duplicating a saved LSP configuration
When you want to add a new LSP configuration, you can save work by duplicating an existing
configuration and editing the name and any other parameters you may want to change. You can
duplicate an LSP configuration by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the Saved Configuration tab.
3. Select the saved configuration
4. Click the Duplicate button.