Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2164)

2092 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Reports Template Manager overview
52
Table 206 describes the fields and components of the Detailed Cluster Report.
TABLE 206 Detailed Cluster Report fields and components
Field/Component Description
Cluster The name of the cluster.
System Information System information includes the following:
•
Alias Name — An optional name that is entered using the Properties dialog box. It
provides an alternate name for the product if you want to override the Host Name
and System Name values.
•
Host Name — The name that the Management application obtains from the product
during discovery. This may be the Domain Name System (DNS) name of the product,
but may come from other naming services, depending on the configuration of the
operating system on which the Management application is running.
•
System Name — The name the Management application retrieves from the
"sysName" SNMP MIB variable during discovery. This name corresponds to the
value specified by the hostname command in the product configuration file.
The Management application displays the first name it finds for the product in the
following order: Alias Name, Host Name, System Name. The Alias Name takes
precedence over Host Name, which takes precedence over System Name.
•
Config Mode — The configuration mode.
•
Node Count — The number of nodes in the fabric.
•
Status — The status of the fabric.
•
Contact — A contact name for the product.
•
Location — The location of the product.
•
Serial Number — The serial number of the product. The serial number is not
displayed for products that support stacking.
•
Description — A description of the product.
Nodes Node information includes the following:
•
Name — The name of the node. Click the name of a product to launch the Detailed
Product Report.
•
IP Address — The IP address of the product.
•
Product Type — The type of product.
•
Serial Number — The serial number of the product.
•
RBridge ID — The RBridge ID number of the product.
•
Status — The status of the product.
•
Model — The model of the product.
•
Firmware — The firmware level of the product.
•
Fabric Ports — The number of fabric ports on the product.
•
Edge Ports — The number of edge ports on the product.
Admin Status Administrative status information includes the following:
•
Name — The name and IP address of the product.
•
Status — Whether the product is in normal operating mode or troubleshooting
mode.
•
Status Last Updated — When the last status update occurred.
•
Memo — A memo for the product.
•
Memo Last Updated — When the last memo update occurred.