Deleting a port group – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 223
Brocade Network Advisor SAN + IP User Manual
153
53-1003155-01
Port Groups
4
4. Click OK to close the dialog box.
Deleting a port group
You can delete more than one group at a time.
To delete a port group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the port group you want to delete in the Product List and select Delete Group.
Ctrl and click to select more than one group to delete.
A confirmation message displays.
3. Click Yes.
The group is deleted from the Ports Groups folder of the Product list.
Port Actions list
Select one of the following options:
•
Enable
•
Disable
•
Display Attached Port Properties
Performance list
Select to launch the real time or historical performance.
Identifier
The identifier of the port.
Name
The name of the port.
MAC Address
The MAC Address of the port.
Port Status
The status of the port.
Port State
The state of the port.
Type
The port type.
Speed
The Speed of the port.
L2/Tag Mode
Indicates whether L2 tag mode is enabled or disabled. If enabled,
indicates whether the port is tagged, untagged, or dual.
Untagged VLAN ID
The untagged VLAN identifier of the port.
Duplex Mode
The duplex mode of the port, such as auto-sense, full-duplex, or none.
Stacking Port
Whether or not the port stacked.
Role
The role of the device, such as Edge.
Product
The name of the product.
User_defined_property (up to 3)
A user-defined port property value. You can create up to 3 user-defined
properties (refer to
TABLE 21
Port Group Properties fields and components
Field/Component
Description