Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual

Page 1966

Advertising
background image

1894

Brocade Network Advisor SAN + IP User Manual

53-1003155-01

Configuration rules

47

Network OS Interface Switchport
mode check

Checks whether the Network OS
interface is configured to be a
switchport or not. If not configured,
the test will fail.

No

Matches

switchport

No

Network OS Interface Access mode
check

Checks whether the interface is
configured to be in access mode. This
condition should be used within an
interface block.

No

Matches

switchport
switchport mode
access

Yes

Network OS Interface Port Profiled
check

Checks whether the interface port is
profiled. This condition should be
used within an interface block.

No

Matches

port-profile-port

No

IronWare OS Interface shutdown
check

Checks whether the IronWare device
port is in shutdown state. (This is not
applicable for Ethernet router
products.) This condition should be
used within an interface block.

No

Matches

disable

No

IronWare OS Interface sflow check

Checks whether sFlow is configured
on the IronWare device port. This
condition should be used within an
interface block.

No

Matches

sflow-forwarding
sflow sample 32768

Yes

IronWare OS SNMP community
Strings configured check

Checks whether SNMP community
strings are configured.

Yes

Matches

snmp-server
community .*

No

Network OS SNMP community strings
configured check

Checks whether SNMP community
strings are configured.

Yes

Matches

snmp-server
community private rw
snmp-server
community public

No

IronWare OS Interface name check

Checks whether the port is named or
not.

Yes

Matches

port-name.*

No

IronWare OS VLAN name check

Checks whether the VLAN is named or
not.

Yes

Matches

vlan(.)+name(.)+$

No

IronWare OS Super User password
enabled check

Checks whether the super user
password is enabled on the device or
not.

Yes

Matches

^enable
super-user-password

No

IronWare OS Password min length
enabled check

Checks whether the password
minimum length is enabled or not.
The range allowed is from 8 through
255 characters.

Yes

Matches

^enable
password-min-length
([8-9]|[1-9][0-9]|1[0-
9][0-9]|2[0-4][0-9]|2
5[0-5])$

No

IronWare OS AAA Console Enabled
check

Checks whether the AAA console is
enabled or not

Yes

Matches

^enable aaa
console$

No

IronWare OS SSH timeout check

Checks whether the IP SSH timeout
value has been configured for the
device in the range [1 - 120].

Yes

Matches

'^ip ssh +timeout
(0*([1-9][0-9]?|1[01]
[0-9]|120))$'

No

IronWare OS SSH idle-time check

Checks whether the IP SSH
idle-timeout is less than or equal to
10 minutes.

Yes

Matches

^ip ssh +idle-time
([0-9]|10)$

No

TABLE 169

Predefined conditions (Continued)

Name

Description

Use
regular
expression

Matches/
Not Matches

Configuration

Lines in
exact
order

Advertising