Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 578)

506 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN topology layout
9
• Port Label. Select to configure which port labels display.
NOTE
Changes apply to the selected fabric or the fabric to which the selected item belongs.
- Name. Displays the name as the port label. If the port has not been given a name, the
WWN of the port displays.
- Port. Displays the slot and port as the port label for a chassis switch and the port number
for a switch.
- Port Address. Displays the port address as the port label.
- Port WWN. Displays the port world wide name as the port label.
- User Port #. Displays the user’s port number as the port label.
- Zone Alias. Displays the zone alias as the port label.
• Port Display. Select to configure how ports display.
- Occupied Product Ports. Select to display the ports of the devices in the fabrics (present in
the Connectivity Map) that are connected to other devices.
- UnOccupied Product Ports. Select to display the ports of the devices (shown in the
Connectivity Map) that are not connected to any other device.
- Attached Ports. Select to display the attached ports of the target devices.
- Switch to Switch Connections. Select to display the switch-to-switch connections.
Switch-to-switch connections only display when the Attached Ports option is also selected.
Customizing the layout of devices on the topology
You can customize the layout of devices by group type or for the entire Connectivity Map.
Customizing the layout makes it easier to view the SAN and manage its devices. Group types
include Fabric, Host, Storage, Router and Switch groups.
1. Right-click a group or the Connectivity Map and select Map Display.
The Map Display Properties dialog box displays. The Map Display Layout list varies depending
on what you selected (group type or Connectivity Map).