Disabling a backup schedule – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 1453
Brocade Network Advisor SAN + IP User Manual
1381
53-1003155-01
Schedule backup
32
•
Day of the week - If you selected Weekly as the frequency type, select the day from the list.
•
Day of the month - If you selected Monthly as the frequency type, select the day of the
month from the list.
6. Click OK.
The new schedule appears in the Backup Scheduler list of the Schedule Backup dialog box.
When scheduled backups begin, the Management application polls each product to check its
current configuration.
NOTE
Software image backup is not initiated on VDX or VCS devices.
Disabling a backup schedule
To disable a scheduled backup, complete the following steps.
1. Select an entry in the Backup Scheduler list of the Schedule Backup dialog box.
2. Click Edit.
The Edit Automatic Configuration Backup dialog box displays.
3. Select the Disable Scheduling check box.
The Status column is updated as Disabled.